Ta1 Titanium Seamless Pipe Pure Titanium Tube laser cutting Ta2 titanium pipe Tantalum Tube Pipe rod bar sheet
Product Description
Zirconium and zirconium alloys have a series of characteristics, such as low density, high specific strength, corrosion resistance, irradiation resistance, excellent wear resistance, excellent processability, non-toxic, non-magnetic, small cross-section of thermal neutron absorption.
It is popular used in those files:
(1) Glass coating &Watch coating
(2) Ocean and space equipments
(3) Medical use equipment
(4) Sewage disposal
In view of the fact that zirconium and zirconium alloys have low density, high specific strength, corrosion resistance, radiation resistance, excellent wear resistance, excellent processing performance, non-toxic, non-magnetic, compared with traditional stainless steel, copper, nickel, titanium and other metal alloys, zirconium and zirconium alloys have excellent corrosion resistance, which can resist the corrosion of most organic acids, inorganic acids, strong bases and some molten salts. In wastewater treatment, food processing, strong acid production industry, it is mainly used in equipment and components with high requirements for corrosion resistance, such as reactor, acid resistant pump, heat pump, heat exchange pipe, immersion tank, acid resistant impeller, valve, agitator, nozzle and container lining. The zirconium equipment and devices used by American chemical enterprises have been in use for more than 25 years without obvious corrosion damage. The conversion rate is as high as 85% ~ 90%, which greatly improves the production efficiency of enterprises. In the process of deep-sea exploration, zirconium alloy can not only withstand the erosion of sea water and sand, seawater corrosion and fluid friction and wear, but also adapt to the alternating temperature environment of - 200 ~ 200 ºC. This is due to the low thermal expansion coefficient of zirconium, which can be stably and continuously used. The absorption cross section is small
Factory directly sale plate type 3N5 purity Tantalum sputtering target
TA, a metallic element, mainly exists in tantalite and coexists with niobium. The hardness of tantalum is moderate, and it is malleable. It can be drawn into thin wires to make thin foil. The coefficient of thermal expansion is very small. Tantalum has excellent chemical properties and high corrosion resistance. It does not react with hydrochloric acid, concentrated and aqua regia under both cold and hot conditions. It can be used to make evaporators, electrodes, rectifiers and electrolytic capacitors of electronic tubes. Used medicinally to make thin sheets or threads to repair damaged tissue. Although the corrosion resistance of tantalum is very strong, its corrosion resistance is due to the formation of a stable protective film of tantalum pentoxide.
| Commodity Name | Tantalum Tube Pipe rod bar sheet |
| Delivery Status | Bright surface |
| Processing Method | Polished surface |
| Purity | Ta≥99.95% |
| Density | 16.65g/cm3 |
| OD | 0.8-80mm |
| Wall thickness | 0.05-5mm |
| Length | 100-5000mm |
| Standard | ASTM B521 |
| Application | Industrial, Electronic, Medical,etc |
Specification:
| Content, Max, Weight % |
| Element | R05200 Uanlloyed Tantalum | R05255 90% Tantalum 10% Tungsten | R05252 97.5% Tantalum 2.5% Tungsten | R05240 60% Tantalum 40% Niobium |
| C | 0.010 | 0.010 | 0.010 | 0.010 |
| O | 0.015 | 0.015 | 0.015 | 0.020 |
| N | 0.010 | 0.010 | 0.010 | 0.010 |
| H | 0.0015 | 0.0015 | 0.0015 | 0.0015 |
| Fe | 0.010 | 0.010 | 0.010 | 0.010 |
| Mo | 0.020 | 0.020 | 0.020 | 0.020 |
| Nb | 0.100 | 0.100 | 0.50 | 35.0~42.0 |
| Ni | 0.010 | 0.010 | 0.010 | 0.010 |
| Si | 0.005 | 0.005 | 0.005 | 0.005 |
| Ti | 0.010 | 0.010 | 0.010 | 0.010 |
| W | 0.05 | 9.1~11.0 | 2.0~3.5 | 0.050 |
| Ta | Remainder | Remainder | Remainder | Remainder |
Application:
| Item | Tantalum |
| Relative atomic mass | 180.9479 |
| Atomic number | 73 |
| Melting point | 2996°C |
| Boiling point | 5425°C |
| Density | 16.65g/cm3 |
| Method | HIP/Melting |
Advantage:
(1) Smooth surface without pore,scratch and other imperfection
(2) Grinding or lathing edge, no cutting marks
(3) Unbeatable lerel of material purity
(4) High ductility
(5) Homogeneous micro trucalture
(6) Laser marking for your special Item with name, brand, purity size and so on
(7)Every pcs of sputtering targets from the powder materials item&number, mixing workers,outgas and HIP time,machining person and packing details are all made ourselves.
All of those step can promise you once a new sputtering target or method is created ,it could be copied and kept to support a stabel quality products.
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).
Product Tags:
|
|
Pure R05240 0.02mm 1mm Titanium Seamless Tube Alloy Pipe Alloy Ta1 Ta2 Images
|
